Configuring email alerts
Wazuh can be configured to send the alerts to an email. You can configure the system to send emails when certain rules are triggered or configure it to send a daily report.
Mail example:
From: Wazuh <you@example.com> 5:03 PM (2 minutes ago)
to: me
-----------------------------
Wazuh Notification.
2017 Mar 08 17:03:05
Received From: localhost->/var/log/secure
Rule: 5503 fired (level 5) -> "PAM: User login failed."
Src IP: 192.168.1.37
Portion of the log(s):
Mar 8 17:03:04 localhost sshd[67231]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.1.37
uid: 0
euid: 0
tty: ssh
--END OF NOTIFICATION
Generic email options
In order to configure Wazuh to send alerts through email, you need to configure the email settings inside the <global>
section:
<ossec_config>
<global>
<email_notification>yes</email_notification>
<email_to>me@test.com</email_to>
<smtp_server>mail.test.com..</smtp_server>
<email_from>wazuh@test.com</email_from>
</global>
...
</ossec_config>
To see all the available options to configure it, go to global section
After the global configuration, we need to configure the email_alert_level
. This option establishes the minimum level to send an alert. By default is set to 7.
<ossec_config>
<alerts>
<email_alert_level>10</email_alert_level>
</alerts>
...
</ossec_config>
This example will set the minimum level to 10. More information: alerts section.
When you have configured the alert_level
, Wazuh needs to be restarted for the change take effect
a) For Systemd:
systemctl status wazuh-manager
b) For SysV Init:
service wazuh-manager status
Warning
Wazuh doesn't handle SMTP authentication. If you want to use an email with it, you need to configure a server relay.
Granular email options
Wazuh also allows a very granular configuration options for your alerts through email. Here you will find some examples of the granular configuration. More info: email_alerts section
Warning
The minimum level you configured inside alerts
section, will be also valid here.
So, for example, if you configure your system to send an email when the rule 526 is triggered, if that rule has a level lower than the configured on the previous section the alert will not be sent.
Email alert based on level
The general configuration will be:
<email_alerts>
<email_to>you@example.com</email_to>
<level>4</level>
<do_not_delay />
</email_alerts>
This will send to you@example
and email if the any rule with level greater or equal to 10 is triggered. Remember, if the level here is less than the email_alert_level configured on the previous section, this will not be sent.
Email alert based on level and agent
The general configuration will be:
<email_alerts>
<email_to>you@example.com</email_to>
<event_location>server1</event_location>
<do_not_delay />
</email_alerts>
This will send to you@example
and email if the for the rules triggered on the server1
.
Also, event_location
can be configured to monitor a specific log, hostname or network (IP)
Email based on rules ID
<email_alerts>
<email_to>you@example.com</email_to>
<rule_id>515, 516</rule_id>
<do_not_delay />
</email_alerts>
This will send an email if the rules 515 or 516 are triggered on any agent.
Email based on the group
Each rule can have one or more groups configured. We can use this groups to filter the rules that we want to send through email:
<email_alerts>
<email_to>you@example.com</email_to>
<group>pci_dss_10.6.1</group>
</email_alerts>
This will send an alert if any rule part of the pci_dss_10.6.1
group is triggered on any machine.
Multiples options and multiples email
This example will show you the real capacity of this capability:
<ossec_config>
<email_alerts>
<email_to>alice@test.com</email_to>
<event_location>server1|server2</event_location>
</email_alerts>
<email_alerts>
<email_to>is@test.com</email_to>
<event_location>/log/secure$</event_location>
</email_alerts>
<email_alerts>
<email_to>bob@test.com</email_to>
<event_location>192.168.</event_location>
</email_alerts>
<email_alerts>
<email_to>david@test.com</email_to>
<level>12</level>
</email_alerts>
</ossec_config>
This configuration will send:
An email to alice@test.com if any alert on server1 or server2 is triggered
An email to is@test.com if the alerts came from
/log/secure/
An email to bob@test.com if the alerts came from any machine on the
192.168.0.0/24
networkAn email to david@test.com if the alerts have a level equals or higher than 12.
Force forwarding an alert by email
It's also possible to force the mail alert on the rule declaration. In order to do so, you need to use option
The possible values for this option are:
alert_by_email: Always alert by email.
no_email_alert: Never alert by email.
no_log: Do not log this alert.
So for example this rule:
<rule id="502" level="3">
<if_sid>500</if_sid>
<options>alert_by_email</options>
<match>Ossec started</match>
<description>Ossec server started.</description>
</rule>
This will send an email every time this rule is triggered. I doesn't matter the level minimum level configured on the <alerts>
section in ossec.conf