Use cases
This section will present several use cases to give you a taste for the Wazuh API's potential. Details about all possible API requests can be found in the reference section.
Exploring the ruleset
Often when an alert fires, it is helpful to know details about the rule itself. The following request enumerates the attributes of rule 1002:
# curl -k -X GET "https://localhost:55000/rules?rule_ids=1002&pretty=true" -H "Authorization: Bearer $TOKEN"
{
"data": {
"affected_items": [
{
"filename": "0020-syslog_rules.xml",
"relative_dirname": "ruleset/rules",
"id": 1002,
"level": 2,
"status": "enabled",
"details": {
"match": {
"pattern": "core_dumped|failure|error|attack| bad |illegal |denied|refused|unauthorized|fatal|failed|Segmentation Fault|Corrupted"
}
},
"pci_dss": [],
"gpg13": [
"4.4"
],
"gdpr": [],
"hipaa": [],
"nist_800_53": [],
"groups": [
"syslog",
"errors"
],
"description": "Unknown problem somewhere in the system."
}
],
"total_affected_items": 1,
"total_failed_items": 0,
"failed_items": []
},
"message": "All selected rules were returned",
"error": 0
}
It can also be helpful to know which rules matching a specific criteria are available. For example, all the rules with a group of web, a PCI tag of 10.6.1, and containing the word failures can be showed using the command below:
# curl -k -X GET "https://localhost:55000/rules?pretty=true&limit=500&search=failures&group=web&pci_dss=10.6.1" -H "Authorization: Bearer $TOKEN"
{
"data": {
"affected_items": [
{
"filename": "0260-nginx_rules.xml",
"relative_dirname": "ruleset/rules",
"id": 31316,
"level": 10,
"status": "enabled",
"details": {
"frequency": "8",
"timeframe": "240",
"if_matched_sid": "31315",
"same_source_ip": "",
"mitre": "\n "
},
"pci_dss": [
"10.6.1",
"10.2.4",
"10.2.5",
"11.4"
],
"gpg13": [
"7.1"
],
"gdpr": [
"IV_35.7.d",
"IV_32.2"
],
"hipaa": [
"164.312.b"
],
"nist_800_53": [
"AU.6",
"AU.14",
"AC.7",
"SI.4"
],
"groups": [
"authentication_failures",
"tsc_CC7.2",
"tsc_CC7.3",
"tsc_CC6.1",
"tsc_CC6.8",
"nginx",
"web"
],
"description": "Nginx: Multiple web authentication failures."
}
],
"total_affected_items": 1,
"total_failed_items": 0,
"failed_items": []
},
"message": "All selected rules were returned",
"error": 0
}
Testing rules and decoders
With the Wazuh API, it is possible to start a wazuh-logtest session or use an already started session to test and verify custom or default rules and decoders. With the following request, a logtest session is created and the rules and decoders that match with the given log are shown. The predecoding phase is also shown, among other information.
# curl -k -X PUT "https://localhost:55000/logtest" -H "Authorization: Bearer $TOKEN" -H "Content-Type: application/json" -d "{\"event\":\"Jun 29 15:54:13 focal multipathd[557]: sdb: failed to get sysfs uid: No data available\",\"log_format\":\"syslog\",\"location\":\"user->/var/log/syslog\"}"
{
"error": 0,
"data": {
"token": "bc3ca27a",
"messages": [
"WARNING: (7309): 'null' is not a valid token",
"INFO: (7202): Session initialized with token 'bc3ca27a'"
],
"output": {
"timestamp": "2020-10-15T09:40:53.630+0000",
"rule": {
"level": 0,
"description": "FreeIPA messages grouped",
"id": "82202",
"firedtimes": 1,
"mail": false,
"groups": [
"freeipa"
]
},
"agent": {
"id": "000",
"name": "wazuh-master"
},
"manager": {
"name": "wazuh-master"
},
"id": "1602754853.1000774",
"cluster": {
"name": "wazuh",
"node": "master-node"
},
"full_log": "Jun 29 15:54:13 focal multipathd[557]: sdb: failed to get sysfs uid: No data available",
"predecoder": {
"program_name": "multipathd",
"timestamp": "Jun 29 15:54:13",
"hostname": "focal"
},
"decoder": {
"name": "freeipa"
},
"location": "user->/var/log/syslog"
},
"alert": false,
"codemsg": 1
}
}
Mining the file integrity monitoring database of an agent
The API can be used to show information about all monitored files by syscheck. The following example shows all events related with .py files in agent 000 (the manager):
# curl -k -X GET "https://localhost:55000/syscheck/000?pretty=true&search=.py" -H "Authorization: Bearer $TOKEN"
{
"data": {
"affected_items": [
{
"file": "/etc/python2.7/sitecustomize.py",
"perm": "rw-r--r--",
"sha1": "67b0a8ccf18bf5d2eb8c7f214b5a5d0d4a5e409d",
"changes": 1,
"md5": "d6b276695157bde06a56ba1b2bc53670",
"inode": 29654607,
"size": 155,
"uid": "0",
"gname": "root",
"mtime": "2020-04-15T17:20:14Z",
"sha256": "43d81125d92376b1a69d53a71126a041cc9a18d8080e92dea0a2ae23be138b1e",
"date": "2020-05-25T14:28:41Z",
"uname": "root",
"type": "file",
"gid": "0"
},
{
"file": "/etc/python3.6/sitecustomize.py",
"perm": "rw-r--r--",
"sha1": "67b0a8ccf18bf5d2eb8c7f214b5a5d0d4a5e409d",
"changes": 1,
"md5": "d6b276695157bde06a56ba1b2bc53670",
"inode": 29762235,
"size": 155,
"uid": "0",
"gname": "root",
"mtime": "2020-04-18T01:56:04Z",
"sha256": "43d81125d92376b1a69d53a71126a041cc9a18d8080e92dea0a2ae23be138b1e",
"date": "2020-05-25T14:28:41Z",
"uname": "root",
"type": "file",
"gid": "0"
}
],
"total_affected_items": 2,
"total_failed_items": 0,
"failed_items": []
},
"message": "FIM findings of the agent were returned",
"error": 0
}
You can find a file using its md5/sha1 hash. In the following examples, the same file is retrieved using both its md5 and sha1:
# curl -k -X GET "https://localhost:55000/syscheck/000?pretty=true&hash=bc929cb047b79d5c16514f2c553e6b759abfb1b8" -H "Authorization: Bearer $TOKEN"
{
"data": {
"affected_items": [
{
"file": "/sbin/swapon",
"perm": "rwxr-xr-x",
"sha1": "bc929cb047b79d5c16514f2c553e6b759abfb1b8",
"changes": 1,
"md5": "085c1161d814a8863562694b3819f6a5",
"inode": 14025822,
"size": 47184,
"uid": "0",
"gname": "root",
"mtime": "2020-01-08T18:31:23Z",
"sha256": "f274025a1e4870301c5678568ab9519152f49d3cb907c01f7c71ff17b1a6e870",
"date": "2020-05-25T14:29:44Z",
"uname": "root",
"type": "file",
"gid": "0"
}
],
"total_affected_items": 1,
"total_failed_items": 0,
"failed_items": []
},
"message": "FIM findings of the agent were returned",
"error": 0
}
# curl -k -X GET "https://localhost:55000/syscheck/000?pretty=true&hash=085c1161d814a8863562694b3819f6a5" -H "Authorization: Bearer $TOKEN"
{
"data": {
"affected_items": [
{
"file": "/sbin/swapon",
"perm": "rwxr-xr-x",
"sha1": "bc929cb047b79d5c16514f2c553e6b759abfb1b8",
"changes": 1,
"md5": "085c1161d814a8863562694b3819f6a5",
"inode": 14025822,
"size": 47184,
"uid": "0",
"gname": "root",
"mtime": "2020-01-08T18:31:23Z",
"sha256": "f274025a1e4870301c5678568ab9519152f49d3cb907c01f7c71ff17b1a6e870",
"date": "2020-05-25T14:29:44Z",
"uname": "root",
"type": "file",
"gid": "0"
}
],
"total_affected_items": 1,
"total_failed_items": 0,
"failed_items": []
},
"message": "FIM findings of the agent were returned",
"error": 0
}
Getting information about the manager
Some information about the manager can be retrieved using the Wazuh API. Configuration, status, information, logs, etc. The following example retrieves the status of each Wazuh daemon:
# curl -k -X GET "https://localhost:55000/manager/status?pretty=true" -H "Authorization: Bearer $TOKEN"
{
"data": {
"affected_items": [
{
"wazuh-agentlessd": "running",
"wazuh-analysisd": "running",
"wazuh-authd": "running",
"wazuh-csyslogd": "running",
"wazuh-dbd": "stopped",
"wazuh-monitord": "running",
"wazuh-execd": "running",
"wazuh-integratord": "running",
"wazuh-logcollector": "running",
"wazuh-maild": "running",
"wazuh-remoted": "running",
"wazuh-reportd": "stopped",
"wazuh-syscheckd": "running",
"wazuh-clusterd": "running",
"wazuh-modulesd": "running",
"wazuh-db": "running",
"wazuh-apid": "stopped"
}
],
"total_affected_items": 1,
"total_failed_items": 0,
"failed_items": []
},
"message": "Processes status were successfully read in specified node",
"error": 0
}
You can even dump the manager current configuration with the request below (response shortened for brevity):
# curl -k -X GET "https://localhost:55000/manager/configuration?pretty=true§ion=global" -H "Authorization: Bearer $TOKEN"
{
"data": {
"affected_items": [
{
"global": {
"jsonout_output": "yes",
"alerts_log": "yes",
"logall": "no",
"logall_json": "no",
"email_notification": "yes",
"email_to": "me@test.example",
"smtp_server": "mail.test.example",
"email_from": "wazuh@test.example",
"email_maxperhour": "12",
"email_log_source": "alerts.log",
"white_list": [
"127.0.0.1",
"^localhost.localdomain$",
"8.8.8.8",
"8.8.4.4"
]
}
}
],
"total_affected_items": 1,
"total_failed_items": 0,
"failed_items": []
},
"message": "Configuration was successfully read in specified node",
"error": 0
}
Playing with agents
Here are some commands for working with the agents.
This enumerates 2 active agents:
# curl -k -X GET "https://localhost:55000/agents?pretty=true&offset=1&limit=2&select=status%2Cid%2Cmanager%2Cname%2Cnode_name%2Cversion&status=active" -H "Authorization: Bearer $TOKEN"
{
"data": {
"affected_items": [
{
"node_name": "worker2",
"status": "active",
"manager": "wazuh-worker2",
"version": "Wazuh v3.13.1",
"id": "001",
"name": "wazuh-agent1"
},
{
"node_name": "worker2",
"status": "active",
"manager": "wazuh-worker2",
"version": "Wazuh v3.13.1",
"id": "002",
"name": "wazuh-agent2"
}
],
"total_affected_items": 9,
"total_failed_items": 0,
"failed_items": []
},
"message": "All selected agents information was returned",
"error": 0
}
Adding an agent is now easier than ever. Simply send a request with the agent name and its IP address.
# curl -k -X POST "https://localhost:55000/agents?pretty=true" -H "Authorization: Bearer $TOKEN" -H "Content-Type: application/json" -d "{\"name\":\"NewHost\",\"ip\":\"10.0.10.11\"}"
{
"data": {
"id": "013",
"key": "MDEzIE5ld0hvc3RfMiAxMC4wLjEwLjEyIDkzOTE0MmE4OTQ4YTNlMzA0ZTdiYzVmZTRhN2Q4Y2I1MjgwMWIxNDI4NWMzMzk3N2U5MWU5NGJiMDc4ZDEzNjc="
},
"error": 0
}
Ingest security events
New in version 4.6.0.
You can send security events for analysis using the Wazuh API.
There's a limit of 30
requests per minute and 100 events per request. This limit prevents endpoints to ingest large amounts of data too fast. Check max_request_per_minute to lower this limit even further or disable the feature.
# curl -k -X POST "https://localhost:55000/events" -H "Authorization: Bearer $TOKEN" -H "Content-Type: application/json" -d '{"events": ["Event value 1", "{\"someKey\": \"Event value 2\"}"]}'
{
"data": {
"affected_items": [
],
"total_affected_items": 2,
"total_failed_items": 0,
"failed_items": []
},
"message": "All events were forwarded to analisysd",
"error": 0
}
Conclusion
The provided examples should help appreciate the potential of the Wazuh API. Remember to check out the reference document to discover all the available API requests.